L&M™ SEAL HARD® is a proprietary, colorless, environmentally safe chemical solution that increases the wear surface strength of concrete floors subjected to pedestrian and vehicle traffic. L&M SEAL HARDpenetrates concrete surfaces to seal, dustproof, densify and harden them. L&M SEAL HARD floors last longer, cost less to maintain, are...
L&M™ LION HARD® is a VOC-free, environmentally friendly lithium silicate concrete floor densifier and hardener. This product penetrates bare concrete surfaces and transforms them into a permanently dust free floor with a prideful gloss that gets better with age....
L&M™ CHEM HARD™ chemically reacts with soft free lime and calcium carbonate compounds in concrete forming dense, insoluble, chemically resistant flint-like surfaces. L&M CHEM HARD is a VOC-compliant, colorless solution of a carefully controlled concentration of 100% active sodium silicate chemicals with a non-acid penetrant. L&M CHEM HARD may be...
For the most abrasion resistant, heavy duty floor topping, we recommend L&M™ EMERYTOP 400™. This flowable, natural emery aggregate floor topping produces a very durable floor. L&M EMERYTOP 400 provides an economical, abrasion resistant solution to very severe and abusive concrete floor conditions where other solutions have failed....
For that needed abrasion resistant industrial floor topping we recommend L&M™ DURATOP HP™. This flowable natural metamorphic spinel aggregate produces a highly abrasion and chemical resistant solution for abusive impact and concrete floor wear conditions. The high concentration of the very abrasive resistant aggregates consisting of...
L&M™ QUARTZPLATE FF™ LIGHT REFLECTIVE is a readymixed, scientifically graded, 98% pure silica aggregate, non-metallic, dry shake-on hardener which combines the abrasion resistance of the natural quartz aggregate with energy saving light reflectivity. L&M QUARTZPLATE FF treated floors wear up to four times longer than...
L&M™ QUARTZPLATE FF™ is a ready-mixed, scientifically graded, 98% pure quartz silica aggregate, dry shake hardener. It has been specifically engineered for early application to concrete floors that are designed to conform to a specific floor flatness designation....
L&M™ TRAP ROCK™ is a combination of 100% graded trap rock and portland cement. It is a polyhedral shaped, abrasion resistant, chemically inert, non-absorbent aggregate produced from igneous rock. This dense mineral aggregate is crushed into a polyhedral shape. It is carefully graded to assist...
L&M™ GRIP IT™ is a natural mineral emery-magnetite non-slip aggregate. L&M GRIP IT consists of more than 56% aluminum oxide and 24% ferric oxide....
L&M™ EMERYPLATE FF™ is the industry's high strength dry shake for industrial concrete floors requiring additional abrasion resistance. It is the first emery aggregate dry shake surface hardener designed specifically for early application to concrete floors that must conform to a specific flatness designation....