Concrete Construction Chemicals

L&M™ PETROTEX™ is a ready to use, quick drying, multifunctional, water-based concrete protectant containing a new generation, invisible, and VOC compliant emulsion of silane, siloxane and synthetic polymers. L&M PETROTEX effectively protects concrete pavements, natural or synthetic stone surfaces, chemically hardened concrete to resist the penetration of water...

L&M™ E-CON™ is a concentrated, odorless, water-based polymer liquid that, when placed on fresh concrete, forms a thin, continuous monomolecular film that temporarily reduces rapid moisture loss from the concrete surface. L&M E-CON reduces contractor field problems with exposed exterior concrete by minimizing surface crusting...

L&M™ LUMISEAL WB™ formulations are VOC compliant, nonyellowing, waterbased, curing/sealing compounds designed to provide medium to high gloss sealing qualities that are totally resistant to yellowing from ultraviolet exposure. L&M LUMISEAL WB is suitable for use on both interior and exterior horizontal and vertical surfaces....

L&M™ LUMISEAL FX™ is a water-based, non-yellowing, blush resistant curing and sealing compound designed to provide attractive, high gloss sealing qualities. L&M LUMISEAL FX is formulated with advanced low-VOC, self-crosslinking emulsion chemistry, providing a very durable film and excellent early water-resistance to whitening or blistering. L&M LUMISEAL FX is suitable...

L&M™ SEAL HARD® is a proprietary, colorless, environmentally safe chemical solution that increases the wear surface strength of concrete floors subjected to pedestrian and vehicle traffic. L&M SEAL HARDpenetrates concrete surfaces to seal, dustproof, densify and harden them. L&M SEAL HARD floors last longer, cost less to maintain, are...

L&M™ CHEM HARD™ chemically reacts with soft free lime and calcium carbonate compounds in concrete forming dense, insoluble, chemically resistant flint-like surfaces. L&M CHEM HARD is a VOC-compliant, colorless solution of a carefully controlled concentration of 100% active sodium silicate chemicals with a non-acid penetrant. L&M CHEM HARD may be...

For the most abrasion resistant, heavy duty floor topping, we recommend L&M™ EMERYTOP 400™. This flowable, natural emery aggregate floor topping produces a very durable floor. L&M EMERYTOP 400 provides an economical, abrasion resistant solution to very severe and abusive concrete floor conditions where other solutions have failed....

For that needed abrasion resistant industrial floor topping we recommend L&M™ DURATOP HP™. This flowable natural metamorphic spinel aggregate produces a highly abrasion and chemical resistant solution for abusive impact and concrete floor wear conditions. The high concentration of the very abrasive resistant aggregates consisting of...

L&M™ TRAP ROCK™ is a combination of 100% graded trap rock and portland cement. It is a polyhedral shaped, abrasion resistant, chemically inert, non-absorbent aggregate produced from igneous rock. This dense mineral aggregate is crushed into a polyhedral shape. It is carefully graded to assist...

L&M™ EMERYPLATE FF™ is the industry's high strength dry shake for industrial concrete floors requiring additional abrasion resistance. It is the first emery aggregate dry shake surface hardener designed specifically for early application to concrete floors that must conform to a specific flatness designation....

L&M™ DURAGROUT™ is a ready-mixed, non-shrink, nonmetallic, flowable, high-strength structural grout. L&M DURAGROUT contains a balanced blend of washed and graded silica sands, portland cement, flow improvement compounds, and a shrinkage compensating system which produces a volume stable structural grout....

L&M™ VIVID DYE WB PLUS™ is formulated using extremely fine molecules of color designed to penetrate and color any cementitious surface. L&M VIVID DYE WB PLUS was created for use with FGS PermaShine polished concrete floor system, but can be used as a base color or touch up for acid...

L&M™ VIVID DYE™ is formulated using extremely fine molecules of color designed to penetrate and color any cementitious surface. L&M VIVID DYE was created for use with FGS PermaShine polished concrete floor system, but can be used as a base color or touch up for acid stained concrete...

L&M™ JOINT TITE 750™ is a self-leveling, 100% solids, two component, rapid curing, polyurea control joint and crack filler. L&M JOINT TITE 750 is designed to fill interior random cracks, damaged control joints, saw cut control joints, and construction joints in industrial concrete floors. L&M...

L&M™ FGS HARDENER PLUS™ is a proprietary, chemical hardening solution that is formulated to increase the wear resistance and surface strength of concrete floors that have been mechanically ground, smoothed, and polished. When used in conjunction with the patented FGS PERMASHINE® FLOOR POLISHING PROCESS, L&M FGS...

L&M™ FGS Concrete Conditioner™ is a proprietary concrete cleaner and conditioner designed for on-going maintenance of hardened polished concrete surfaces. This product is highly concentrated and contains state-of-the-art wetting and emulsifying agents. L&M FGS Concrete Conditioner is specifically manufactured to be used for maintenance of...

L&M™ DEBOND® GOLD™ is a non-staining, VOC-compliant, 100% chemically active, concrete form release for application to all types of concrete forms, but especially for use in demanding prestress and precast applications. L&M DEBOND GOLD is a pale, fast drying, ready to use, sprayable liquid that is non-toxic and safe...

L&M™ FASTRAK™ is a high strength, cement-based concrete and masonry patching compound. This non-shrink, single component mortar offers high strength, sulfate resistance and is stable at elevated temperatures and under wet conditions. After initial set, L&M FASTRAKmay be shaved or shaped to conform to surrounding surface contour....